job|tag- villagegatenews.com

W

Hair Clippers For Men Product Review

On January 12, 2012, in brushes Combs, by Luke Judge

ever since technology introduces gadgets and appliance that can possibly offer fast working experience – hair clippers for men is just one of these products today that have proven its capacity from assisting fast and convenient hair cut job for men. In this post we will have some few product review about men hair clippers, what are the brands and product specification that is available in the market today, and how much it possibly cost to avail hair clippers for best and convenient hair cut result.

Benefits of Hair Clippers for Men

Hair clippers for men are the newest way of enjoying haircut for men. It is a small hair-cutting appliance that can possibly offer fast haircut experience, convenient haircut procedure, while it’s easy to maneuver with the possible haircut design that you wanted to style with your hair.

With different comb attachments, hair clippers for men can possibly let you have different hair-cutting options depending with the type and style that you wish your hair to look like.

Hair Clippers Product Review

Argos Value Range Mains Hair Clipper (£6.99) – this type of hair clipper for men is made with a stainless steel blade, with four available combing style attachment, hair-cutting scissors, comb, and a hanging loop to easily and safely keep the item after using.

Remington HC5015 10 Piece Hair Clipper Kit (£9.99) – this hair clipper kit for men is made with five combing style attachments suitable for any type of hair length, with additional accessories of neck brush, comb, blade cap, advanced steel blades, moustache comb, and hair-cutting scissors.

BaByliss for Men 7436U 22 Piece Pro Hair Clipper Set (£14.97) – compared from the above hair clipper brand, this kit is much expensive although it can possibly offer higher advantage than the above stated brands for your desired hair clippers. This type of hair clipper for men is made with a diamond sharpened stainless steel blades to possibly enjoy fast and efficient haircut experience, while it includes 10 comb attachment, and other kit accessories such as travel pouch, all types of haircut cleaning brush, cape, scissors, oil, barber’s comb, blade guard, and product instruction kit.

Along with other available brands for hair clippers for men you can easily shop for the type of hair clipper product that you wish to avail for yourself. you can simply search and check online for other product brands, while you can also check for other product reviews on where you can mostly have greater advantages for your hair clipper item for men. you can choose whether you wish to avail from any trusted online retail sites or directly shop from websites of some particular brand for men’s hair clippers and avail discounts for cheaper and reasonable shopping deals.

About Taylor

Tagged with: argos • comb • job • mains • stainless steel blade

W

Low priced Vouchers – Find Free Market Services As a result of Discount Discount vouchers

On January 12, 2012, in holiday Vouchers Coupons, by Luke Judge

No one would like to risk money and get a brand new product. for that reason, companies sector their brand new productions by means of promotional exercises. you often have seen a great deal of companies releasing free trials among men and women. the purpose would be to create awareness on the minds from the buyers. At present, you can certainly some free of cost promotional solutions through reduction vouchers. how must this job? why implement companies present free services in their customers on the inclusion of price lowering coupons? Let’s look at this system.

Most makes launch new items at daily intervals. even so, companies have got to build a rely upon the minds from the customers previously they put in money. this is certainly done by simply distributing free examples of the merchandise. Companies present discount vouchers in their customers as well as free your business products can be found to the approaches who apply it. this offer incorporates a spending restriction in the process. for example, a material company may supply a free shirt with a minimum purchase of just one thousand excess fat. If you happen to be using a 50 percent reduction coupon, you should pay 600 pounds.

Even any gambling industry is at on any act. It’s hence competitive ever since anything to provide them a good sharp edge including giving for free free bets only to join will be tried. in great britan there really are a massive quantity of games web-sites and such are additionally promoting ourselves using discounts.

So, why implement companies try this advertising? It’s considering it will work because lots of people and particularly women are searching for a real deal. in that time period of worldwide recession as well as austerity by using earnings stagnating as well as inflation as well as taxes rising it will be no surprise how the particular method of easing the tension on a family budget is ever more popular.

A lot of days, there’s really no better choice for supper than dominos vouchers, hot lasagna that’s covered within your favourite toppings. Spanning Australia, many familys agree which will Domino’s is the best choice intended for pizza. A brand new for a rapid dinner, evening snack, as well as fun-filled get together, ordering Domino’s can be described as crowd pleaser. Yet irrelevant of how much you really should sink your own teeth perfectly into a delicious, abject pizza, the price tag on ordering released can come rather easily. Many families experience the ordering pizzas with a weekly groundwork, while others have got to order great quantities at once. Fortunately, there’s an option that assists cut the prices of placing your order pizza, while still obtaining the quality Domino’s meals you’ve at all times enjoyed -vouchers!

Having Domino’s coupons, customers can save cash instantly as soon as shopping on-line. and using the convenience which will Domino’s supplies to her customers, it will be now probable to get your lasagna online, and various other delicious ingredients, such because meat-filled sandwiches as well as penne pasta. this allows you for customers to pick exactly what they gotta have and spending more than available coupons, which vary reported by location. for any most complete deals, make sure you enter within your location information and also the Domino’s closest in your direction will listing the out there vouchers, peaceful noted speaker Hope Lopez reassured.

For the purpose of families by using children, it will be indeed difficult to get to know the expenses of childcare, in addition to the daily requirements from the household. frankie and bennys voucher, childcare means that you can avail the exact amount specifically for the children. in familys where the parents will work, paying intended for daycare everyday are generally expensive. If you’re a performing parent and not just applied for any vouchers, then it will be time you need to do it. Crucial aspect might be that, a sensational scene to meet any rigid formalities and having it. children, right from any career, can get the coupons. this should indeed be cheapest gift for the child imagine you’re would make sure the day-to-day requirements from the child usually are met. how must Childcare Discount vouchers Work: Childcare Vouchers are generally availed by means of your own employers by means of, what might be unofficially often called the Net income Sacrifice way. this method is very easy, but it implies that you need to surrender an element of your salary to the employer. your employer will supply you with the vouchers well worth that degree. the confine of redeeming the number of the coupons varies right from country to be able to country, but it will be roughly goes to 250 pounds 30 days and it might save as much as 1000 pounds annually. with the parents performing, and by using each parent in a position to redeem coupons, the degree doubles and also the resulting amount satisfies mostly the whole set of expenses that this child demands. and this is certainly done till the child is 16 years. So you could pay intended for daycare when he’s young, then school fees fees as well as food when he’s older.

Merits: the put in advantage might be that many generous businesses, and for everybody who is fortunate enough to experience one like, gives any vouchers in addition to the normal paycheck. this is extremely because each one cares for any children. in addition, even for everybody who is surrendering an element of your paycheck, once the child outgrows this when this individual needs daycare, you could revert to the original paycheck. the process is likewise relatively simple when compared to o michaels coupons r formalities in connection with work as well as day-to-day located. However, its also wise to remember that this amount being redeemed month after month remains a similar; whether you will have one young child or a number of children, you could only redeem a hard and fast amount month after month.

Tagged with: 100 women • job • money 97

W

Garden Containers, Flower Pots and Planters

On January 10, 2012, in Cream Preserve Pots Collectables, by Luke Judge

There are many reasons for growing plants in garden containers, flower pots and planters. an obvious one is if you are growing exotic plants that can be placed outdoors in summer in a location that suits each plant, and then taken indoors or into a more shaded spot in the fall and winter. they are also very convenient for people who live in mobile homes.

People who rent their homes and tend to move around with their job can grow their own plants that can move with them. Plants grown in garden containers are portable, and to many people this is big advantage. Not only that, but you arrange your garden as you please rather than the plants being in fixed positions. Using containers and flower pots it is possible to plant a whole garden that can be rearranged to suit the flowering patterns of the plants.

No more bare patches in spring due to some plants flowering late, or in summer when the short-lived flowers die off quicker than their longer lasting or hardier cousins. you can fill in the bare patches with new pots or planters, and arrange the colors to suit your preference. you can decorate your veranda or patio with the flowers that are in season, and are not restricted to the same ones all year round.

While this all sounds like a very good reason for using nothing but pots and planters, there are certain aspects using them that have to be considered. Potted plants are totally depended on you for their water and nutrition. their root growth is restricted and you have to know which plants are suitable for this type of environment. you should also consider the overall look of your garden and the shape and color of your pots and planters.

First the plants. Pots are restrictive and the size will depend on the requirements of the plants. Ferns, for example, grow better when the root system is crowded whereas roses prefer a bit more space in which to grow, especially climbing varieties. Cyclamens too prefer more space, and so would be more suited to large pots or planters. Trees prefer large pots, and the larger garden tubs would be more appropriate for the larger varieties.

The same is true of shrubs and larger perennials such as hydrangeas. you can start these off in smaller pots, and gradually increases the size as they grow. Bulbs can be grown in planters, about two to three bulb widths apart, though the fall bulbs will need some exposure to the frost since they need a low temperature for a strong root growth.

Annuals are ideal for color, especially if you get a lot of frost in the winter, and they can be replaced each year. If you plant them fairly close together in garden containers or planters, you can design a lovely looking garden, or a fine display for a patio. Planters are available in a wide range of colors and shapes, and can be made of concrete cast into a variety of shapes or stained or painted wood to suit their surroundings.

Hardwood planters fitted with a trellis are ideal for climbers, and can be free standing units suitable for outdoor use, or even for hallways, vestibules and conservatories. Cedar is popular, but so also are cypress, oak and cherry. they are suitable for a number of climbing plants from sweet peas to cyclamen to passion fruit.

Most annuals are suitable for garden containers, pots and planters, some particularly attractive choices being petunia, tobacco plant (nicotiana) with its wonderful smell, and begonias. the latter two are particularly suitable for growing in shaded areas, as is impatiens or ‘Busy Lizzie’. other flowers suitable for containers are lavandula, gaura and salvia which provide colorful opportunities for any type of garden design. Cigar Plants (cuphea) love lots of sun and have unusual flowers. These shrubs are ideal for tubs in sunny climates.

Many people use containers for window ledges and balconies, and if you have decking, then deck rail planters are an attractive means of hanging plants from the handrails. many people prefer the look of natural terracotta, but keep in mind that earthenware pots and planters dry out very quickly, and so need a lot of watering. the plastic equivalents are much more practical, if not as attractive.

Garden containers, flower pots and planters are an attractive and very practical way of decorating your garden, patio or conservatory, and a little bit of imagination can work wonders. they also provide a very practical means of planting for those that like to frequently rearrange their garden, or are often on the move.

Tagged with: fall and winter • flowers • garden containers • job • planters • suits

W

Installing Drywall – Mudding and Taping

On January 7, 2012, in tape, by Luke Judge

Installing Drywall, or hanging drywall as the professionals usually refer to the task, can be done by the homeowner. However, it is usually best done with two or more people as it requires significant lifting of heavy material. Mudding and Taping can also be performed by the homeowner, however these tasks require some practice and artistry.

Measuring and Ordering Drywall

Prior to actually hanging the drywall, the material first needs to be ordered and delivered. to determine how much material to order, measure all of the surface area, starting with the ceilings and then the walls. Calculate the total square feet and divide by 32. The result should give you the number of 4′x 8′ sheets of drywall required for the job. I would also recommend adding another 5-10% to this figure to account for inefficiencies. Drywall does come in larger sheets, such as 4′x12′, however for a Do-it-Yourself homeowner these larger sheets can become unwieldy and maybe even impossible to bring into the existing home.

For bathrooms or other moist areas Greenboard should probably be used as this material is moisture resistance.

For bathroom areas where ceramic tile is to be applied, e.g. Shower/Bathtub areas, Concrete board should be used. The concrete board is also referred to as Wonderboard or Durock.

Joint Compound and Fiberglass tape will also be required for Taping and Mudding. Joint Compound typically comes ready-mixed in 5 gallon containers. I would suggest 1-2 containers per 500 square feet of drywall. Fiberglass tape is quite inexpensive so I would suggest picking up 2 to 3 roles for most Do-it-Yourself drywall projects.

Drywall screws or ringed nails will also be required. Typically I use 1.25 length screws or nails. also, strips of corner bead will be required.

Drywall Tools

Prior to starting drywall installation, you need to obtain the proper tools. A Drywall Lift really comes in handy when hanging sheetrock/drywall on the ceilings. You can rent Drywall Lifts at hardware or home improvement stores. If your budget does not allow for this cost, Jacks (or Ts) can be made out of 2x 4s. The Jacks (or Ts) should be of a length such that they are just an inch or two taller than the height of the ceiling and have a cross beam that is approximately 3′ in width. usually there are a couple of 45o angle braces connecting the crossbar to the main stem of the Jack. The Jack can then be used to hold up the drywall to the ceiling while it is screwed/nailed into place.

In addition to the Lift or Jacks, a drywall screw gun, hammer, T-square, carpenters knife, drywall saw and a keyhole saw are required. The keyhole saw is used for cutting around electrical boxes.

If mudding and taping are to be performed then Taping knives, a Corner knife, sand paper, a pole sander and a Mud easel or pan will be necessary. for the taping knives you will need a 6 wide blade and a 12 wide blade.

Preparing the site for Drywall

Prior to hanging the drywall, make sure the building inspector has first approved the Framing, Plumbing, Electrical and Insulation jobs. secondly, a vapor barrier should be applied over the insulation on the outside walls if un-faced insulation was installed. Frequently sheets of plastic are used for creating the vapor barrier. The plastic is simply stapled to the framing, covering the insulation.

Finally, inspect all of the framing carefully. Ensure that nailers (e.g. 2 x 4s) are existent at each corner and header, that the framing is straight, and that the framed walls create smooth planes. in addition, the ceiling should have strapping applied (1 x 3 cross boards). also, make sure metal protection plates have been installed to studding where sheetrock screws or nails could inadvertently penetrate plumbing pipes or electrical wire.

Safety

Drywall installation is dirty, heavy work. The Gypsum in drywall can be irritating to the eyes, lungs and sinuses so wear safety goggles and masks to avoid breathing in the material. Gloves are also recommended to protect against sharp blades.

Installing Drywall

Start with the ceiling as this will allow the sheets on the walls to help hold the sheets on the ceiling. use the Drywall lift or Jacks to hold the sheets in place while screwing or nailing them to the ceiling. The screws or nails should be installed such that they are slightly recessed and create a small dimple without breaking the paper. Screws or nails should be applied every 8 to 12 inches on each stud. Screws are typically stronger and can be placed further apart, e.g. 12 inches. It is best to fasten the screws/nails to the edges of the drywall first and then fill in the field afterwards.

Rows of drywall should be applied in a staggered pattern. this will create an interlocked pattern that creates a tighter and stronger ceiling/wall.

After the ceiling has been completed it its time to move on to the walls. Drywall should be applied from the top down, with the sheets hung perpendicular to the floor joists or studs. again the rows should be staggered. The bottom piece should sit about inches from the sub-floor.

For purposes of efficiency and strength it is best to apply the large sheets of drywall over the doors and window openings and cut out the excess later. this will create stronger/cleaner looking walls and save significant time.

Installing Corner bead

Once the drywall has been installed, corner bead should be applied to all outside edges. Corner bead should be nailed every 6-8 inches and penetrate the framing.

Taping and Mudding

Again start with the ceiling. Apply a skim coat of joint compound over the surface of a seam using a 6 wide taping knife. If the seam is wide, apply a liberal amount of joint compound to fill it. While the Joint compound is still wet, apply the fiberglass tape over the skim coat of Joint Compound. Make sure the seam is centered under the tape. Once the tape has been installed, apply additional Joint Compound over the tape, again using the 6 wide taping knife. Continue this for all of the seams. Note: the tape will still be visible. Additional coats will eventually hide it.

The inside corners are usually the most tricky and require practice. Patience is the best advice and note that additional coats will be applied later to smooth out any imperfections.

Once the seams are done, using the 6 wide taping knife, apply mud to all of the screw/nail dimples. A skim coat is all that is initially required.

Note: when applying the mud over the tape and screw/nail dimples, make sure all excess material and uneven patches are smoothed down with the blade. this will reduce sanding later.

Once the ceiling is done, you can move on to the walls. Repeat the same process, however with the outside corners just apply a liberal coat of joint compound to the valley that is formed by the corner bead. this valley typically represents the first 3 or 4 inches from the edge of the corner.

Once the first coat has been applied let it sit overnight or until it is dry, prior to starting the second application of Joint compound. Make sure to completely clean off the taping knife, the mud easel and any other containers or instruments that have mud on them prior to finishing up for the day.

Applying the second Coat of Mud

After the first coat has thoroughly dried, it is now time to apply the second coat of mud. It is this coat that should hide the tape.

Again, start with the ceiling. using the wider taping knife apply a generous amount of joint compound over the taped seams as you want to build up the area over the tape. taking large strokes smooth the joint compound over the tape applying more pressure to the side of the taping knife further away from the tape. this will help to leave more mud over the tape. when complete, the mud should cover an area that extends beyond the width of the tape by 2 to 3 inches.

After the seams have all been completed, apply a second coat of mud over the screw/nail dimples. With this second coat, flare out the mud over the dimples such that the diameter of the mudded area is about 3-4 inches in diameter.

For the inside corners a Corner knife may come in handy. Corners involve a little artistry so again take your time. Apply a generous amount of joint compound and then run the Corner knife down the corner starting from the top. take long, even strokes. A 6 taping knife may also be helpful to smooth out any imperfections.

For the outside corners, using the broad taping knife apply a generous amount of joint compound and flare out the material such that it extends out 6 inches or so from the corner. again, apply more pressure to the blade side that is further away from the corner so that you leave more mud nearer the outside corner.

Once the second coat has been applied let it sit overnight or until it is dry, prior to starting the final application of Joint compound. Make sure to completely clean off the taping knife, the mud easel and any other containers or instruments that have mud on them prior to finishing up for the day.

Applying the Final Coat of Mud

After the first coat has thoroughly dried, it is now time to apply the final coat of mud. It is this coat that requires the most artistry and the least amount of joint compound. Here you are simply applying a final skim coat to the already mudded areas.

Prior to applying the skim coat it is best to take your wide taping blade and lightly pass over the mudded surfaces. this will remove any bumps or ridges.

Again start with the ceiling seams and apply a small amount of joint compound using the broad taping knife. again continue to flare out the seam by extending the mudded area such that about 6 inches resides on each side of the now invisible tape. Remember this is a skim coat so little mud is required. The purpose of this coat is to effectively fill in any lines or recessed areas.

After the seams have all been completed, apply a final coat of mud over the screw/nail dimples. With this second coat, flare out the mud over the dimples such that the diameter of the mudded area is about 6-8 inches in diameter.

For the corners use the broad taping knife and add just enough mud such that you can flare out the mudded surface area to about 8-12 inches, taking care to filling in any lines or dimples.

Once the final coat has been applied let it rest overnight or until it is dry,

Sanding

Sanding is a very dusty and dirty mess so please uses goggles and a mask.
I find it best to use a pole sander with an open screened sand paper material specifically designed for sanding sheetrock/drywall mud.

Lightly sand all of the taped areas, however concentrate sanding on the outer edges of the mudded areas such that all seams and ridges are eliminated and blend into the main surface areas.

Once sanding is complete, vacuum up the dust and you are ready for priming and painting the walls and texturing the ceilings.

Tagged with: artistry • bathroom areas • existing home • job • square feet

W

Leeds chairman Ken Bates: Ban clubs who rubbish FA Cup

On January 7, 2012, in overseas Clubs, by Luke Judge

By Neil Ashton

Last updated at 11:02 PM on 6th January 2012

From the FA to FIFA, no-one is safe from Ken Bates. The Leeds United chairman is on a roll and he wants everyone to listen.

Bates is on the attack, accusing theFA of pandering to the top teams and demanding their exclusion from Europe if they disrespect the world’s oldest cup competition.

Warning: the Leeds chairman wants the FA to get tough

He claims the FA are ‘chickens’, afraid to challenge the top clubs in this country and scared of change at international level.

Bates said: ‘The FA are not strong enough. The FA Cup is the most prestigious competition of English football and it should be respected as such by the participants.

‘For clubs who do not respect the FA Cup, there are a number of sanctions the FA can take.

‘First they could fine them. They could deduct points. But the ultimate sanction would be not to nominate them for Europe.

‘Don’t forget, every club that plays in Europe is nominated by the FA. normally it’s a rubberstamp job but it doesn’t have to be. The FA are too weak, though.’

Cup mission: Grayson will seek to mastermind another upset

Bates is a traditionalist, principled in his approach as he prepares for Leeds’s tough trip to the Emirates to face Arsenal on Monday.

He is making demands, urging Arsene Wenger to pick his first team to take on Simon Grayson’s side in front of 5,000 travelling fans from Yorkshire.

The Leeds chairman said: ‘You should field your first team in the FA Cup. this is the dilemma the FA Cup has fallen into, you now have a 25-man squad, that’s it.

‘Once you name your 25-man squad, as long as you play 11 out of those 25, that’s fine, that’s my strongest team or are the FA going to pick myteam? That’s the problem.

‘If you go to the Johnstone’s Paint Trophy, they have a rule where a percentage of the players have to play in the majority of first team games. that should be considered for the FA Cup.’

The FA are currently looking at ways to improve the competition, setting up a task force to restore the traditions of a tournament that is respected aroundthe world. Abolishing replays, seeding teams and more midweek matches are among the proposals under consideration, but Bates is not ready for change.

He said: ‘Why change the rules? why should you abolish FA Cup replays, which Sven Goran Eriksson tried to get us to agree with David Davies.

‘It was to get more rest for the players. The FA, FIFA and UEFA play more and more meaningless bloody international friendlies, for which the club pay their wages and pick upthe bloody injuries. I don’t agree with that.’

For a brief moment he shows some respect for the FA, backing their decision to ban Liverpool striker Luis Suarez for eight games.

Under fire: Fifa president Sepp Blatter

But the former Chelsea chairman, who was previously on the FA executive, claims that international caps should no longer be awarded for non-competitive matches.

He said: ‘The awarding of international caps is a disgrace. The cap is a privilege, an honour, not on a par with the Victoria Cross, but it’s up with a Distinguished Service Order.

‘When Eriksson was the manager, I proposed to the international committee that caps should only be awarded for competitive matches to players who play at least 45 minutes of the game.

‘The international committee said, ”We will leave it to the manager”, but of course he (Eriksson) was as weak as dishwater. The international committee were the bosses, Eriksson was just a transient employee.

‘Such an important decision should have been made by the FA. it wasn’t. They chickened out.

‘If we are playing Albania in a meaningless friendly and Billy Bloggs comes on in the 88th minute he’s got an international cap.

‘How can you compare that with Bobby Moore or Ted Drake? Beckham has 115 caps, more than Moore (108).’

Bates is not done just yet, saving some time for FIFA and his views on the president, Sepp Blatter. Bates would urge international teams to resign from the body, pulling away from the powerbase and setting up an independent organisation of their own.

He said: ‘Blatter is past his sellby date. The only way to beat FIFA is if the European nations resigned from it. that would be the end of FIFA. I can’t see Samoa versus Fiji being an exciting, worldwide TV game. I wouldn’t have a World Cup, not in its current form. I didn’t watch it growing up.’

Tagged with: disrespect • job • prestigious competition • traditionalist

W

Grieving mum’s plea for safety

On January 5, 2012, in commodore, by Luke Judge

W

How To Start A Resume

On January 2, 2012, in training Equipment & Goals, by Luke Judge

So you want to sit in front of your computer and start a resume, yet can’t seem to get started. So you procrastinate and feel guilty.

Psychological barriers surrounding various aspects of a job finding campaign are common. The inability to start a resume is one of them. it could be your stumbling block.

A way to overcome writer’s block is to understand four common reasons job hunters procrastinate writing their resumes –

Reason #1 — you’re concerned that you resume won’t look impressive.

Reason #2 — you think you don’t have much to say because you haven’t done a heck of a lot in your career.

Reason #3 — the feeling you lack the necessary skills.

Reason #4 - you feel what you put down in writing is set in stone.

All off these reasons are pure poppycock

Resumes follow one of several standard formats. So they all look alike. therefore, there is no resume that is better, best, or most impressive looking. your resume will be impressive enough when you choose a format and start filling it in with accomplishments from your current and previous jobs.

As you begin writing about the various positions you’ve held, you’ll be pleasantly surprised as you uncover many accomplishments you’ve forgotten about, along with the skills you used to achieve them.

A job candidate I coached told me he had forgotten that he led the Y2K project for his firm until he started writing is first resume draft. this is what happens to many job finding clients. they uncover forgotten achievements as they write. And a comment I hear frequently from job candidates in the resume writing process is, Gee, I didn’t realize how good I was.

You, too, will remember how good you were when you start writing. And resume skills are developed as you write.

When it comes to your belief that putting something down in a resume is like setting it in stone, you can always change a resume as your job search unfolds. It’s a good idea to revise it along the way as you get clear about what you’re looking for. Remember, your resume is a work in progress.

Resume resources you can use include Dummy books about resume writing, working with a career counselor, or getting feedback from friends and colleagues.

Finally, the most effective way to start a resume is to use the GOYA formula. GOYA is an acronym that means –

Get Off Your Anatomy and start that resume right now

Tagged with: job • lot 105 • psychological barriers • reason 2 • resumes • stumbling block

W

Technical Support Psychology – Dealing With Stress

On December 25, 2011, in technical Support Services, by Luke Judge

Good people skills are essential. Each job has its own level of stress, some more so than others. Providing technical support in the IT industry in particular can be extremely difficult because, as well as dealing with sometimes incredibly complex equipment, the engineer onsite must also try to pacify an irate CEO or business executive.

Don’t get overwhelmed by the situation In most companies, time is money and there could be anywhere between 2 and 2,000 people waiting for you, the engineer, to fix the problem. when faced with this kind of pressure it’s very easy to be overwhelmed by the situation and go into a ‘panic mode’, trying various things at random, without any kind of definite plan. This is generally a very bad place to be, as more often than not, you’ll make the problem worse and not better.

I have found that the best approach to this is to take a mental step back then a few deep breaths to try to calm your mind. It’s going to be a tough day but it’s only a few hours of your life so there’s absolutely no point in getting too stressed out about it.

Do not confuse relaxing with not caring. You still have a problem to solve with professionalism and expediency. once you have control of yourself then you are ready to take care of your client.

Another situation that generates stress is that, during the course of troubleshooting a problem, you will run out of ideas. It’s inevitable that at some point in your career this will happen to you. again, the key here is not to panic or despair.

Go back over the facts and try to think ‘outside the box’. It’s possible the solution to your problem is sitting right in front of you but you are simply too close to see it.

Try to get a second opinion if possible. Sometimes a fresh pair of eyes on a problem is all it takes to resolve it. if this isn’t possible then perhaps a sounding board will help – just someone to bounce ideas off to help get your mind back on track. They don’t have to be technical or understand what you are talking about. in fact you can even talk to yourself (although I don’t recommend this especially if there are other people around.). The main aim here is to get the situation completely clear in your head.

De-stress Your Client It’s quite common to receive a call for help some time after a problem has occurred (sometimes even months may have elapsed). Perhaps the client thought they could fix the problem themselves or maybe they thought the problem would just go away. Anyway, it hasn’t, the client is in a panic and now it’s YOUR job to fix it.

When faced with this situation your first priority is to calm down your client. have no doubt that they’ll be all over you on site, maybe trying to help or just trying to make you understand the urgency of their situation. Remember, they could be losing thousands of dollars an hour so make sure you respond appropriately. They will be stressed. if they want to know what you are doing, tell them.

Always speak to your clients at their technical level

If your client is a technician then talk technical, if not, then drop the ‘jargon’ as far as possible. Watch them as you are talking and make sure they’re not phasing out. The blank look is a sure sign they don’t understand what you are saying and have tuned out. It’s very easy to fall into the habit of using technical jargon and acronyms that are completely obvious to people in the industry but mean absolutely nothing to your client. if they can’t understand you, they’ll just get more stressed.

Another thing you should be aware of is even if your client doesn’t understand what you’re talking about they may not say anything or ask any questions in fear of looking stupid. Make sure you’re all on the same wavelength.

De-stress Yourself In order for you to fault find effectively you’ll require a degree of peace and quiet to be able to think clearly. if your client is panicking or there’s too much going on around you try using the following strategies:

Reassure your client that their problem can and will be fixed as quickly as possible.

Speak calmly and firmly so they know you are in control of the situation.

LISTEN to what they have to say. This will also have a calming effect on them and show them you care.

Try to organise one point of contact so you’re not constantly disturbed by various people popping their heads in to see how the repair is going.

Once you have your client under control you’ll be able to get more useful information from them regarding the problem.

The whole point here is to try to create an environment which is as stress free as possible.

Tagged with: business executive • deep breaths • engineer • job • level of stress

W

Car Polishing: A Simple Small Business Start Up

On December 25, 2011, in car Cleaning Waxing & Valeting, by Luke Judge

Do you like to spend just a few hours polishing and cleaning your car? if you do then place your expertise to work for yourself and start a part-time car polishing job. a car polishing enterprise is needed for more than ever in these days of multiple tasking times. One of the simplest enterprises to begin with may be a car polishing business. how fine it truly is for being the boss of something that you have cherished for years. there are wonderful rewards of running your own business, particularly getting paid for doing effort that already gives one joy.

Car polishing can be considered a start-up business, however in a short time you could grow your work into a full-time car detailing business. Remember that buffing automobiles is hard work, it takes time persistence along with understanding. You can not only generate a revenue from buffing cars, but you’ll also obtain knowledge of your interests. Not only will you produce extra cash income meant for every one in a family, but you can gain understanding that can cultivate your car polishing business into extra areas of car preservation.

Getting your car polishing small business started. Talk with your those in your neighborhood, your loved ones and those that you work with. once they see the standard of your work they’ll turn out to be loyal toward you. do the top job feasible, your objective is to have them go back to you again. What you actually are trying to do now is to have your prospects widen the declaration on your work, this would aid your car buffing small business to nurture. always shake your customer’s hand and show gratitude for the business. After your car polishing work brings in additional income don’t forget to reinvest. Planning is key now and you’ll want to ensure you have the many resources to get you there.

Novice versus pros. Be known as the car buffing professional. Now it’s time to become a professional auto polisher not just a beginner. You are actually so much more accomplished than when you initially started, your skill sets and methods are much better. look at the tools of your industry, will they hold up to the rigors that you put them in on a daily basis. will the principle instrument of your enterprise last up much longer, yes we’re talking regarding the electric car polisher that got you this far. Get a look at the car polisher that you have been using, if it’s a little beat up and was no more than an affordable model you need to take into consideration upgrading to an expert model configured to handle the demands that you’ll be placing it through. as an expert car buffer you should have expert tools in addition to materials.

Managing your time, know your time constraints. your car polishing small business has grown and you’ll have to develop into not just professional jobs but in addition a competent business manager. how you need to do the items which can be expected of you should always coincide with using time which is required to polishing a car that allows you to achieve the quality of work it needs. in no way give up quality because of time restriction.

Creating a mistake while buffing a car could be expensive to you. doing the very best work possible is the very first thing to keep your visitors lasting trust. Take possession in your work, gain knowledge about additional elements of polishing vehicles, what the latest tools and methods to assist your clients with their needs, stay ahead of the competition.

Take note, you have to be as proficient as you can be. Persistence as well as being sympathetic of your visitors is so essential, be mindful of not just your requirements but the customers as well. many a business has gone under on behalf of not enough time administration. When this comes about then superiority suffers, therefore will your work. Forever be open-minded then your automobile polishing business will be long-lasting and rewarding.

Tagged with: extra cash • job

W

Can Listening to Music Help You Work Better?

On December 24, 2011, in music Song Books, by Luke Judge

There are many people who like to listen to music while they work and I am certainly one of them. I find it helps me focus more on the task at hand. of course I can imagine that there are people who listen to music because it helps them NOT to focus on their job.

Whilst there may be many reasons for wishing to listen to music in the workplace, can it really improve your productivity?

We know that music can alter your mood. Films have been using musical scores for years to create the right mood for a scene. At times you hardly notice the music at all but you are very receptive to the mood being conveyed. So can we use music to put us in a productive mood?

Research seems to support such a claim. for example, a trial where 75 out of 256 workers at a large retail company were issued with personal stereos to wear at work for four weeks showed a 10% increase in productivity for the headphone wearers. Other similar research conducted by researchers at the University of Illinois found a 6.3% increase when compared with the no music control group.

So if we accept that music does increase productivity, does it matter what types of music we listen to? Does all music have the same effect or are certain types better in certain circumstances?

If your goal is to increase your concentration then music which has a constant, easy beat and light melodies are recommended. These are said to be good for those trying to study as they help you pace your reading to aid focus and memorising. Baroque music is reported as an excellent example, especially the works of Vivaldi, Bach and Handel.

Rock music can have a similar effect. According to a report in the journal Neuroscience of Behavior and Physiology, the Russian Academy of Sciences discovered that a person’s ability to recognize visual images, including letters and numbers, is faster when either rock or classical music is playing in the background.

If you are aiming to be more productive through being more relaxed, then you may be interested to learn that research has shown that music with an upbeat rhythm can reduce stress hormone levels by as much as 41%.

Some of the most publicised studies into whether listening to music increases productivity have centred on what has been termed the Mozart effect. The term got its name after a study showed that college students had performed better solving mathematical problems when listening to classical music. The effect of listening to Mozart does not appear to be limited to humans either. Apparently cows will produce more milk if Mozart is played.

Tagged with: films • job • productivity

job